ds21220 rev. 5 - 2 1 of 2 gbj20005-gbj2010 www.diodes.com diodes incorporated features gbj20005 - gbj2010 20a glass passivated bridge rectifier gbj dim min max a 29.70 30.30 b 19.70 20.30 c 17.00 18.00 d 3.80 4.20 e 7.30 7.70 g 9.80 10.20 h 2.00 2.40 i 0.90 1.10 j 2.30 2.70 k 3.0 x 45 l 4.40 4.80 m 3.40 3.80 n 3.10 3.40 p 2.50 2.90 r 0.60 0.80 s 10.80 11.20 all dimensions in mm _ b c d ee g h k j i l m n p r s a characteristic symbol gbj 20005 gbj 2001 gbj 2002 gbj 2004 gbj 2006 gbj 2008 gbj 2010 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage v rrm v rwm v r 50 100 200 400 600 800 1000 v rms reverse voltage v r(rms) 35 70 140 280 420 560 700 v average forward rectified output current @ t c = 110c i o 20 a non-repetitive peak forward surge current, 8.3 ms single half-sine-wave superimposed on rated load (jedec method) i fsm 240 a forward voltage per element @ i f = 10a v fm 1.05 v peak reverse current @ t a = 25c at rated dc blocking voltage @ t c = 125c i r 10 500 a i 2 t rating for fusing (t < 8.3 ms) (note 1) i 2 t 240 a 2 s typical total capacitance per element (note 2) c t 60 pf typical thermal resistance junction to case (note 3) r jc 0.8 c/w operating and storage temperature range t j ,t stg -55 to +150 c case: molded plastic plastic material - ul flammability classification 94v-0 ul listed under recognized component index, file number e94661 moisture sensitivity: level 1 per j-std-020a terminals: plated leads, solderable per mil-std-202, method 208 polarity: molded on body mounting: through hole for #6 screw mounting torque: 5.0 in-lbs maximum weight: 6.6 grams (approx) marking: type number mechanical data glass passivated die construction high case dielectric strength of 1500v rms low reverse leakage current surge overload rating to 240a peak ideal for printed circuit board applications single phase, 60hz, resistive or inductive load. for capacitive load, derate current by 20%. maximum ratings and electrical characteristics @ t a = 25c unless otherwise specified notes: 1. non-repetitive, for t > 1ms and < 8.3 ms. 2. measured at 1.0 mhz and applied reverse voltage of 4.0v dc. 3. unit mounted on 300 x 300 x 1.6mm cu plate heat sink.
ds21220 rev. 5 - 2 2 of 2 gbj20005-gbj2010 www.diodes.com 0.01 0.1 1.0 10 0 0.4 0.8 1.2 1.6 2.0 v , instantaneous forward voltage (v) f fig. 2 typical forward characteristics (per element) i , instantaneous forward current (a) f 100 t = 25c j 100 50 1 10 100 i , peak forward surge current (a) fsm number of cycles at 60 hz fi g . 3 maximum non-repetitive sur g e current 150 2 5 0 0 200 single half-sine-wave (jedec method) t = 25c j 10 100 1 1 10 100 c , total capacitance (pf) t v , reverse voltage (v) r fi g . 4 t yp ical junction ca p acitance f = 1mhz t = 25c j 0.1 1.0 10 100 1000 0 20 40 60 80 100 percent of rated pe ak reverse voltage (%) fi g . 5 t y pical reverse characteristics t = 50c j t = 125c j t = 100c j t = 25c j 0 5 25 50 75 100 125 150 i , average rectified current (a) o t , case temperature (c) c fi g . 1 forward current deratin g curve 10 15 20 2 5 without heatsink with heatsink resistive or inductive load
|
